LED luminous mirror refers to the mirror that can emit light through LED light. Some led cosmetic mirror, led bathroom mirror and tunnel mirror can also be called LED luminous mirror or luminous mirror for short. It also has another more common name is led bathroom mirror or LED mirror. There are two main types of LED luminous mirrors: one is the mirror with explicit LED light band, and the other is the mirror with hidden LED light band. The difference between them is whether they can see the LED light belt, and what can't see the light belt is the mirror of the hidden LED light belt.
LED / Light MIRROR SPECIFICATION
1. Front with 5mm copper and lead free silver mirror.
2. Back with flame retardant acrylic , aluminum square pipe hook, EVA lamp with support (flame retardant: 650℃ searing wire test).
3. Edge procession: Sandblasting around / Transparent acrylic all around / Side shine.
4. 1 key dimmer and color touch switch (IEC61058), anti-fog film 300*290 (UL, CE, SAA) Class 2 requirements.
5. The 230V, 50HZ 24W driver (UL, TUV,SAA) is SELV, type II, PF is greater than 95 SELV safety isolation voltage: the original is the separation of high voltage and low voltage, if the design is not separated, high voltage will be linked to the low voltage end, causing security risks.Type 2 lamps:Double insulation, (CE, SAA) withstand voltage of 3000 v / 1250 v (UL).
6. IP 44 (the first character is dustproof, the second character is waterproof, dustproof is testing the dust bins,The waterproof test is carried out in a waterproof tester. The waterproof test is a spray test, and the electrical part should not be flooded. The lamp should be turned on for 10 minutes and the lamp turned off for 10 minutes.Both must be met to pass the test.)
7. 3000K-5000K, bare band, luminous effect: more than 100LM/W 2835 lamp bead, 0.5W for each lamp bead, more than 85 lamp bead, reach ERP standard, light decay in 6000 hours is less than 20%, life is more than 15000 hours
8. Structure: the structure meets UL/CE requirements, the preferred raw material has UL/ TUV certification.
9. Secondly, the design structure should comply with the certification requirements, from the overall appearance structure of the whole product to the selection of a screw, there are standards. Some of the above requirements are the requirements of the whole product framework.Specific details such as the selection of internal/external conductors, wiring of internal conductors, wiring of external conductors.Wire protection device, anti-pull device, etc.The way the wire is connected, for example, the wire is connected to the driver, the spring terminal is connected, the wire is connected in the way of tin, the screw is connected, the wire cannot be connected in the way of tin, it must be in the way of copper wrapping.There is a tension requirement for the connection.
10. The overall structure of the product has the requirement of firmness, the test requirement is four times of the weight of the product itself.
11. Focus on the smallest and most important part of the product, the screw.The selection of screws, screws on the metal material diameter is not required, torque according to different positions, there are different requirements.Screw on plastic, minimum diameter is more than 3MM, torque is also required.